Skip to content

Free swatches · Made to measure · Worldwide delivery Order swatches

Language & display

Set language, currency and measurement units.

Language

Currency

Display currency is converted from CNY. Orders and payments settle in CNY.

Measurement units

Used for window width and drop. Fabric prices remain per metre.

Four-leaf Clover — Coffee

How to Measure for Bespoke Curtains

A made-to-measure curtain begins with the window it was born for. Measured with care once and noted down with calm precision, the rest of the tailoring flows effortlessly. We work in metres with two decimal places (or centimetres down to the millimetre).

What you need

  • Metal tape measure: Fabric tailor tapes stretch over long spans; a rigid steel tape ensures millimetre accuracy.
  • Room-by-room log: Note each window clearly by location (e.g., “Living Room South Bay”, “Study Alcove”).
  • A second pair of hands: For spans exceeding two metres, having a partner hold the zero mark guarantees true horizontal readings.

Measuring Width (Track or Pole)

Always measure the full length of the track or pole, not the window glass itself. If you are fitting a new fixture, we advise extending 15–20 cm past each side of the window recess so panels stack back gracefully without obstructing precious daylight.

Fixture TypeWhere to Measure
Ceiling or Wall TrackFull track length from end cap to end cap
Curtain PoleDistance between bracket centres, excluding decorative finials
Recessed Pocket / PelmetWall-to-wall width inside the pocket, measured at the narrowest point

Measuring Drop (Finished Length)

Drop is measured from the suspension point—the bottom eyelet of track gliders or the bottom of pole rings—straight down to where you wish the hem to settle:

  • Floor Clearance (Recommended): Measure to the floor and deduct 1–1.5 cm. The fabric hovers cleanly above the floorboards, resisting dust and vacuum snags while maintaining a tailored drape.
  • Gentle Puddle / Break: Measure to the floor and add 2–4 cm. The hem softly pools against the timber or stone, imparting European warmth and quiet grandeur.
  • Sill Length: Measure down to the windowsill and subtract 1 cm, ensuring free closure without buckling.

Fullness & Architectural Proportion

Every dawnsheer drape is crafted to 2.0× fullness as standard. A 2-metre track width employs 4 metres of curated fabric. This proportion creates deep, serene folds that absorb acoustic reverberation and temper harsh exterior light with effortless grace.

Common Pitfalls to Avoid

  1. Measuring the glass aperture: Tracks sit above and beyond window reveals; never order based on glass dimensions alone.
  2. Unchecked floor slopes: Floors in older buildings settle unevenly. Measure the drop on the left, center, and right, choosing the shortest drop so hems do not drag.
  3. Overlooking obstructions: Account for protruding radiators, deep window handles, and timber skirting boards when positioning double tracks.

Frequently Asked Questions

What should I do if my ceiling or floor is slightly uneven?

Take three drop measurements across the span (left, center, right). Base your finished drop on the smallest dimension to ensure the hem hangs true without grazing the floor.

How much pocket depth is required for double tracks?

A single track requires a pelmet pocket width of 10–12 cm. For a dual setup pairing blackout drapery with light-filtering sheers, allow 18–22 cm to ensure both curtains glide with silent ease.

Browse bespoke drapery